Settings lets you adjust your Launch Control XL 3's workflow and hardware. The table below shows the available settings.
To access Settings, press and hold both Track <> buttons for 300 milliseconds.
When you're in Settings:
-
To find a setting, press Page ▲▼ up and down.
-
Adjust the setting's value using the top-left encoder or the Track ◀▶ buttons. The screen shows the current value.
To exit Settings, press Mode button and your Launch Control XL 3 returns to its previous state.
|
Setting |
Value range |
Description |
Default value |
|---|---|---|---|
|
LED Brightness |
1-10 |
Controls the LED brightness. |
8 |
|
Screen Brightness |
1-10 |
Controls the screen brightness. |
8 |
|
Message Timer |
1-10 |
Set how long temporary messages stay on screen. |
5 |
|
MIDI Thru |
On/Off |
When on, it forwards all MIDI messages from the input to DIN output 2. |
Off |
|
Global Channel |
1-16 |
Sets the global channel for Custom Mode controls. |
1 |
Bootloader allows you to change some settings you don't need to change on the fly.
To enter bootloader
-
Unplug the USB cable from your Launch Control XL 3.
-
Hold both Page buttons.
-
Connect the USB cable to power it on.
-
Keep holding the Page buttons until the Launch Control XL 3 is on.
In bootloader mode, you can change the following:
-
Easy Start on/off using the record button.
-
Device ID - using button row 1. Useful when you're using multiple Launch Control XL 3's in your DAW.