The Launch Control 3 has a bootloader mode that allows you to view the current FW versions, enable/disable Easy Start and set the device ID.
To enter bootloader
-
Unplug the USB cable from your Launch Control 3.
-
Hold both Page buttons.
-
Connect the USB cable to power it on.
-
Keep holding the Page buttons until the Launch Control 3 is on.
The screen displays the current Application and Bootloader version numbers.
In bootloader mode, you can change the following:
-
Easy Start on/off using the Mode button.
-
Device ID - using the buttons. Useful when you're using multiple Launch Control 3's in your DAW.
When Easy Start is on, the Launch Control 3 shows as a Mass Storage Device to provide a more convenient first-time experience. You can turn this off once you are familiar with the device to disable this Mass Storage Device.
The buttons set the Device ID to 1-8. Launch Control 3 appears on your system with the device ID appended to the device name. This can be useful when using more than one Launch Control 3 simultaneously.