Settings lets you adjust your Launch Control 3's workflow and hardware. The table below shows the available settings.
To access Settings, go to a Custom mode and press and hold both Track <> buttons for 300 milliseconds.
When you're in Settings:
-
To find a setting, press Page ▲▼ up and down.
-
Adjust the setting's value using the top-left encoder or the Track ◀▶ buttons. The screen shows the current value.
To exit Settings, press the Mode button and your Launch Control 3 returns to its previous state.
|
Setting |
Value range |
Description |
Default value |
|---|---|---|---|
|
Global MIDI Channel |
1-16 |
Sets the global channel for Custom Mode controls. |
1 |
|
MIDI Thru |
On/Off |
When on, it forwards all MIDI messages from the input to DIN output 2. |
Off |
|
LED Brightness |
1-10 |
Controls the LED brightness. |
8 |
|
Screen Brightness |
1-10 |
Controls the screen brightness. |
8 |
|
Display Timeout |
1-10 |
Set how long temporary messages stay on screen. |
3 |
|
Encoder Response |
Slow Medium Fast |
Sets how the encoders respond to how quickly you turn them. Fast mode lets you sweep the full range with a quick spin. Slow mode spreads the same range across more turns for added control. You can make precise changes by turning the encoders slowly on all settings. This affects all Custom Modes; it doesn't affect DAW modes. |
Medium |
Bootloader allows you to change some settings you don't need to change on the fly.
To enter bootloader
-
Unplug the USB cable from your Launch Control 3.
-
Hold both Page buttons.
-
Connect the USB cable to power it on.
-
Keep holding the Page buttons until the Launch Control 3 is on.
In bootloader mode, you can change the following:
-
Easy Start on/off using the Mode button.
-
Device ID - using the buttons. Useful when you're using multiple Launch Control 3's in your DAW.