Pressing the Settings button shows the settings menu on the screen. You can scroll through the Settings list using the Preset ▲▼ buttons. To adjust the settings’ value, use the pads or the Page ◄ ► buttons. The available settings are shown below.
|
Settings |
Description |
Value Range |
Default |
|---|---|---|---|
|
Keys MIDI Channel |
Sets the MIDI channel for the keys |
1-16 |
1 |
|
Chords MIDI Channel |
Sets the MIDI Channel for the Scale Chord and User Chord |
1-16 |
2 |
|
Drums MIDI Channel |
Sets the MIDI Channel for the Drum Mode |
1-16 |
10 |
|
Velocity Curve (Keys) |
Select a velocity curve for the keys |
Soft/Normal/Hard/Off |
Normal |
|
Velocity Curve (Pads) |
Select a velocity curve for the pads |
Soft/Normal/Hard/Off |
Normal |
|
Pad Aftertouch |
Set the Aftertouch type |
Off/Channel/Polyphonic |
Polyphonic |
|
Pad AT Threshold |
Set the threshold in which the aftertouch kicks in |
Low/Normal/High |
Normal |
|
Pot Pick-Up |
Turn pot pick-up on/off for standalone mode. This does not affect FL Studio. |
Off/On |
Off |
|
MIDI Clock Out |
Turn MIDI Clock out on/off |
Off/On |
On |
|
Brightness |
Adjust the pad and screen brightness. |
1-16 |
9 |
|
Vegas Mode |
Turn off/on Vegas Mode |
Off/On |
Off |
If the FLkey is idle for five minutes, it enters Vegas mode. In this mode, colours scroll across the pads indefinitely until you press a pad, button, or key. To turn Vegas mode on and off:
To remove the FLkey from Easy Start mode: